5 Ways to Keep Your Pool Clean and Shimmering

Avoid that dreaded realization that your pool is affected by algae or that the chemical levels are out whack with proper pool maintenance. Here are 5 ways to keep your pool clean all season long!

1. Use Prevention Products

With a few products you can prevent problems from starting in the first place! Be sure to keep these products stocked in your pool-cleaning bin so they’re always on hand when you need to clean.

  • Water clarifier: If you notice the water getting cloudy, use this product. It helps bind small particles to large ones, which are easier for your filter to handle. Follow the directions closely, as too high of a dose can actually worsen the problem.
  • Filter cleaner: At least twice a season, clean your filters. When you remove oily film and dirt your filter works more effectively.
  • Floc: These products help weigh bacteria and debris down so they’ll sink to the bottom. Once there, it’s easier for you to clean with a quick run of your pool vacuum.

2. Clean it Weekly

Sometimes it can feel like keeping your pool clean is a chore not worth the time. However, if you can set aside an hour or two every week, and build it into your evening or weekend routine, a weekly clean doesn’t seem so bad. From cleaning the pool cover to sampling the water, don’t miss a single step.

3. Keep it Balanced

Get into a habit of testing and balancing your pool water in specific increments.

Check pH levels daily, and balance the pool as needed. Your pH levels should be between 7.2 and 7.6. Any higher and the chlorine stops working, which makes the water more susceptible to algae. If the levels are too high, restore them with a dose of sodium ash, or sodium carbonate. Add this as is directed by the manufacturer.

Once a week, check for total alkalinity (TA). When in a normal range, the TA helps stabilize the pH and prevents rapid changes in pH levels.

4. Chlorinate

Chlorine is a critical component in pool maintenance. The first step in chlorinating your pool is choosing the type of chlorine you want to use. You can choose from tabs, liquid and granules. Liquid chlorine has a shorter shelf life than other forms, while the granules can shock, chlorinate and kill algae at one time. Follow the manufacturer directions for how to use the product most effectively.

5. Perform Monthly Tests

Once a month, run a few tests on your pool to be sure your weekly methods are working and that your pool is safe for swimming. When you do, check for:

  • Calcium hardness
  • Filter cleanliness; these should only need to be cleaned every 2 to 4 months
  • Liner cleanliness; wipe down the sides and then vacuum to remove any particles

Didn't find the answer you were looking for? You can always contact us at support@royalswimmingpools.com or choose the category below to see our most frequently asked questions for that topic: