Operating the Hayward ColorLogic Light
Unless you have a ColorLogic Light Controller or another compatible control system, you can control your Hayward ColorLogic light by power-cycling it from the switch.
Power-cycling the Hayward ColorLogic light lets you turn the light on or off and advance to the next fixed color or light show without a special controller or interface.
How Power-Cycling Controls the Light
Use the light switch to control the ColorLogic light:
| Action | What to Do |
|---|---|
| Turn the light on | Turn on the switch. |
| Turn the light off | Turn off the switch. |
| Advance to the next program | Turn the switch off, then back on within 10 seconds. |
What Happens When the Light Turns Back On
When the light has been off for more than 60 seconds and is turned on again, it will come on white for 15 seconds to give you a quick, clear view of the pool. After that, it will return to the last fixed color or color show it was running.
Important Note
Avoid rapidly cycling the switch during the first 15 seconds after the light turns on. Wait until the startup sequence finishes before changing to the next color or light show.
Need More Help?
Didn't find the answer you were looking for? You can always contact us at support@royalswimmingpools.com or choose the category below to see our most frequently asked questions for that topic: