How do you install an Aqua Trol Salt System?

There are 3 steps to keep in mind.

Installation Installation must be performed in accordance with Local and NEC codes.

Preparing Pool Water Refer to page 2 of the manual for recommended chemical levels. The pool's chemistry must be balanced BEFORE activating the Aqua Trol. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturers instructions. This ensures a quick, trouble-free transfer to the Aqua Trol system.

Mounting The Aqua Trol Control The Aqua Trol is contained in a rain-tight enclosure that is suitable for outdoor mounting. The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more if local codes require) from the pool. The control is designed to mount vertically on a flat surface. Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the four sides of the control. Do not mount the Aqua Trol in a panel or tight enclosed area.
The manual will include a photo of how it ties in with everything else at your equipment pad, such as your pump and filter. 

Didn't find the answer you were looking for? You can always contact us at or choose the category below to see our most frequently asked questions for that topic: